Francais  English  Espanol  Deutsch
Home
Slaughterhouses
Vegetables
Various
Partners
Contact
Beef >
Bible
Print
  
TWO-SPEED PAUNCH CLEANING MACHINE
470P - 570P - 670P - 680P - 880P - 980P

PURPOSE
The purpose of the two-speed paunch cleaning machines is to wash, scald, and bleach the inside surface of beef paunches, calf and sheep paunches, pork stomachs, rennets and also bibles of cattle. The work on paunches is done at high speed, and on bibles is done at low speed.

PERFORMANCE
Two-speed paunch cleaning machines enable you to carry out the three big phases of treatment on paunches and bibles in a single operation in a very short time. These three phases ought normally to be done in succession, as follows:

-1. Thorough washing of the offal treated, and complete elimination of stomach content.
-2. Scalding making it possible to separate the mucous membranes.
-3. Whitening by elimination of the internal mucous membrane.

Once the single operation has been completed, beef paunches and calf and sheep paunches come out from the machines perfectly clean. It goes without saying that this result is obtained without any adjunction of chemicals.
The specific design of the plate, which is entirely smooth and equipped with spokes, offers a triple advantage.

-1. The fibres of the paunches and the sheets of bibles remain impeccable and are not damaged in the least.

-2. The loss of weight is particularly low.

-3. The necessary work is carried out in a very short time, because the stomach content between spokes of the revolving plate is removed: around 9 minutes for the bibles, and 5 to 6 minutes for the paunches.

-Optimum hourly yield (see table)

Since the weight of the paunches may vary from 8 kgs (bull calves) to 18 Kgs (cows), the yields may therefore vary in a ratio of one to two. In France the average waight is between 10 and 12 Kgs. (The yields for 12 Kg have been shown in the tables).

                                        HOURLY YIELD (in terms of number treated)

TYPE 470P 570P 670P 680P 880P 980P
CATTLE*

-16 Kg paunches


-12 Kg paunches


-8 Kg paunches


P0: 14
P+B:8+8


PO:21
P+B:12+12


PO:28
P+B:16+16




PO:35
P+B:20+20


PO:50
P+B:28+28


PO:70
P+B:40+40



PO:55
P+B:32+32


PO:70
P+B:40+40


PO:110
P+B:64+64


PO:85
P+B:48+48


PO:110
P+B:64+64


PO:170
P+B:100+100



PO:140
P+B:80+80


PO:180
P+B:104+104


PO:280
P+B:160+160


PO: 180
P+B:100+100


PO:220
P+B:130+130


PO=340
P+B:190+190
SHEEP-CALVE

-1 kg paunches


280


640


1000


1600


2560


3072
PIG

-0,7 Kg stomachs


500


1200


1750


2500


3500


4200

*PO= Paunch only
  P+B= Paunch and Bible

 


 
REFINER
470RD - 570RD - 670RD - 689RD - 880RD - 980RD

PURPOSE
The refiner machines are intended mainly for removing fat from the outside surface of beef paunches, calf and sheep paunches, pork bellies, rennets, and also the bibles of bovines, and for refining all these, for human consumption.

The processing is done after the inside surface has been washed, scaled and bleached, - three phases of the work done beforehand in the LA PARMENTIERE “PAUNCH CLEANING” machines.

The refiner machines also have other uses, as follows:
•For cleaning bellies, snouts, ears, pig tails.
•For scraping calves, ruffles, poultry gizzards;
•For eliminating the skin surrounding the tongues of pigs and beef (particularly with tongues treated immediately after slaughter.

PERFORMANCE
·The Refiner machines make it possible to carry out the three big phases of the final processing of paunches and bibles in a single operation and in a very short lapse of time, - phases that normally are carried out in succession, as follows:

-Stiffening of the items processed,

-Removing the fat,

-Refining, that is: the complete finish operation on the products. Once this single operation has been carried out, the paunches come out of the machine ready for preparation.

•The specific design of the removing plate, covered with an abrasive, and of the dome, with no abrasive but equipped with especially designed bumps offer a three-fold advantage:

-The products are mixed very efficiently, but without brutality. This shortens processing time, -to around 4 to 5 minutes. Weight loss is very appreciably reduced. This is a result of the short time the products processed remain in the machine.

-Optimum hourly yield (see table).

Since the paunch weights may vary in the same proportion.


                                HOURLY YILED (in terms of unit treated)

TYPE 470RD 570RD 670RD 680RD 880RD 980RD
CATTLE

-10 Kg
paunches*


PO: 25
P+B:15 +15


PO: 70
P+B:35 +35


PO: 100
P+B:50+50


PO: 200
P+B:100+100


PO:320
P+B:160+160


PO: 380
P+B:190+190
SHEEP -
CALVES


-0,8 Kg
paunches



250



800



1250



2000



3200



-
PIG

-0,6 Kg
paunches*



300



1500



2200



3100



4300



-

PO = Paunch only
P+B= Paunch + Bible



 
BIBLE SPLITTER
360CF-480CF

PURPOSE
The beef omasum splitter Type 360CF and 480CF is intended for cutting into entirely separated halves beef bibles adequately placed in the machine.
The bible splitter displays a unique performance of high efficiency while at the same time permitting a remarkable hygiene by eliminating dirt and offals on floor and surrounding equipment.

The splitting of beef omasum is carried out prior to bibles being washed in the LA PARMENTIERE two-speed tripe-washer.

PERFORMANCE
• The bible splitter type 360CF has a capacity of up to 360 omasums per hour – or more than 4 times the amount possible per man/hour manually. The 480CF has a capacity of up to 480 omasums per hour.
•The machine offers its users substantially added production-facilities with low energy costs for a high additional product yield.
•By adequate placing of the bibles before cutting the machine ensures complete uniformity and high quality of the later finished consumer-product.
•The fast-rotation of the cutting-blade ensures straight and clean rims without jags and a consequent high product-cleaning result.
•The radical reduction of manual processing ensures remarkable savings in man-power.
•The bible splitter finally offers a completely new approach to tripe department hygiene by totally eliminating dirt, offal and product accumulation on floor and surrounding equipment.


 
WATER RECYCLING SYSTEM

USE

The La Parmentière water recycling system allows water exiting the La Parmentière cleaner to be recovered, for re-use in the multi-purpose La Parmentière machine for washing omasums and rumens at the start of the cycle.

The system comprises:

•An all-stainless steel tray equipped with a lifting pump.

An all-stainless steel filtering rotating drum equipped with a lifting pump, situated above a 1,000 litre tank.

•An automation cabinet managing the water recycling system in phase with the cleaner and multi-purpose La Parmentière machine cycle.

 


 
AUTOMATIC LINES

USE
All the machines in our range for processing bovine rumens, reticulums, omasums and abomasums can be incorporated into a completely automated line, to optimise working time, product quality, water consumption and to assist operatives in their work.

Each line is adapted to suit each customer's working conditions.

They can also be equipped with a rumen lifter to facilitate emptying into the hopper and automatically load the elevators, as well as a cleaner water recycling system, producing a 30% saving in the consumption of water at 85°C.

For a study on custom installations for your tripe hall, Contact us.

 


 
COLUMN LIFTER

USE
Colum elevators are designed for discharging 220 litre so-called “Euro” trolleys, and for discharging trolleys and tanks with a maximum load capacity of 600 and 1,000kg respectively.

DESIGN
The outer parts of the elevator are made of stainless steel. The elevator is driven by a chain transmission.

SAFETY
All elevators are equipped with a mechanically activated safety device against falling.

 


 
Copyright © 2010